Table of Contents
Advertisement
6.
7.
Press
to select MPF. (ONLY ON 3x00cn)
8.
Using
and
, select the appropriate paper size (Envelope). (ONLY ON 3x00cn)
9.
Press the middle button, SELECT, once Envelope is displayed on the lower line, this puts a * by it.
(ONLY ON 3x00cn)
10.
Now we have the MPF Size set to Envelope. (ONLY ON 3x00cn)
11.
Now press MENU to get back to Tray Settings/Paper Size.
12.
Press
to get to Paper Type.
13.
Press
to select Paper Type.
14.
Press
to get to MPF.
15.
Press
to select MPF.
16.
Using
and
, select the appropriate paper type (Envelope).
17.
Press SELECT, once Envelope is displayed on the lower line.
18.
Now we have the MPF Type set to Envelope.
19.
Now press MENU to get back to Ready to Print
20.
Now insert the Envelope-sized stack of paper into the MPF.
21.
On the screen MPF/Envelope will appear. (ONLY ON 3x00cn)
22.
Press SELECT to confirm this. (ONLY ON 3x00cn)
23.
Now on the screen MPF/Envelope will appear.
24.
Press SELECT to confirm this.
25.
We now have all the hardware settings on the printer correct
Now, all software settings screen shots are from WORD, this was done in Word 2003. However if in any
application, you go File
properties window.
26.
Open up Word and create a new document.
27.
Go to File
Print.
28.
Select the Dell Color Laser Printer from the printers list
29.
Click the Properties button to the right.
30.
This brings up Driver Properties.
31.
Click on the Paper Tray Tab.
32.
33.
Print and then click the Properties button, you will get this same driver
- Quick Links:
- Tray Settings
Hide quick links:
Advertisement
Table of Contents
