Table of Contents
Advertisement
44.
Setup printing Transparency from Multipurpose Feeder
1.
On the printer operator panel press MENU.
2.
Press
to get to Tray Settings.
3.
Press
to select Tray Settings.
4.
Press
to get to Paper Size. (ONLY ON 3x00cn)
5.
Press
to select Paper Size. (ONLY ON 3x00cn)
6.
Press
to get to MPF. (ONLY ON 3x00cn)
7.
Press
to select MPF. (ONLY ON 3x00cn)
8.
Using
and
, select the appropriate paper size (Transparency). (ONLY ON 3x00cn)
9.
Press the middle button, SELECT, once Transparency is displayed on the lower line, this puts a * by it.
(ONLY ON 3x00cn)
10.
Now we have the MPF Size set to Transparency. (ONLY ON 3x00cn)
11.
Now press MENU to get back to Tray Settings/Paper Size.
12.
Press
to get to Paper Type.
13.
Press
to select Paper Type.
14.
Press
to get to MPF.
15.
Press
to select MPF.
16.
Using
and
, select the appropriate paper type (Transparency).
17.
Press SELECT, once Transparency is displayed on the lower line.
18.
Now we have the MPF Type set to Transparency.
19.
Now press MENU to get back to Ready to Print
20.
Now insert the Transparency-sized stack of paper into the MPF.
21.
On the screen MPF/Transparency will appear. (ONLY ON 3x00cn)
22.
Press SELECT to confirm this. (ONLY ON 3x00cn)
23.
Now on the screen MPF/Transparency will appear.
24.
Press SELECT to confirm this.
25.
We now have all the hardware settings on the printer correct
Now, all software settings screen shots are from WORD, this was done in Word 2003. However if in any
26.
Advertisement
Table of Contents
