Dell 3110 Color Laser User Manual page 47

SNMP Community
Agent Name (Read
* 1
only)
Community
Name
(Read/Write)
1
Community
Name (Trap)
Trap
Notification 1-4
Authenticate
Error Trap
*1 The default value of each items can be changed by using Dell Printer Configuration Web Tool.
*2 An optional multi protocol card is required to display the item.
IP Filter (IPv4)
Purpose:
To configure the detailed settings for the IP Filter used for LPD and Port9100.
Values:
Specifies the community name to access (read only) the data up to 31
alphanumeric characters.
The original setting will remain valid if no input is made. Characters entered
for community name in previous settings will not be displayed on the screen.
The default Read/Write Community is public.
Specifies the community name to access (read and write) the data up to 31
alphanumeric characters.
*
The original setting will remain valid if no input is made. Characters entered
for community name in previous settings will not be displayed on the screen.
The default Read/Write Community is private.
Specifies the community name used for trap up to 31 alphanumeric characters.
* 1
The original settings will remain valid if no input is made. Characters entered
for Community Name (Trap) in previous settings will not be displayed on the
screen. The default Trap Community is " " (NULL).
Select the check boxes to notify trap occurrence. In this case, specify the IP
address and IP socket in the following format:
· IPv4
Specify the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm format.
Each section of "nnn" is a variable value between 0 and 255. Note that values
127 and 224-254 are not valid for the first three-digits only. IP socket
mmmmm is a variable value between 0 and 65535.
· IPv6
Specify the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format. Each section of
"xxxx" is a hexadecimal variable value between 0 and ffff. IP socket mmmmm
is a variable value between 0 and 65535.
· IPX
Specify the IPX address in the nnnnnnnn.mmmmmmmmmmmm.llll format. IP
network nnnnnnnn is a hexadecimal variable value between 0 and ffffffff, IPX
node mmmmmmmmmmmm is a hexadecimal value between 0 and ffffffffffff
and IPX socket llll is a hexadecimal variable value between 0 and ffff.
Select the check box to notify Authenticate Error Trap.