Table of Contents
Advertisement
At this point, Plug and Play is activate automatically and installs the printer. If the Plug and Play is not
activate, click Install.
When the Plug and Play is complete, the Installation goes to the next step automatically.
4.
Select either the Typical Installation or Custom Installation radio button, and then click Next. If
you select Custom Installation, you can select the specific software you want to install.
5.
When the Congratulations! screen appears, click Print Test Page if necessary. Click Finish.
Windows XP, Windows XP 64-bit Edition, Windows Server
2003, Windows Server 2003 64-bit Edition, and Windows
2000
1.
Connect the printer to your computer with a USB cable or a parallel cable. Then, turn on the printer.
2.
When the Found New Hardware Wizard dialog box appears, click Cancel.
3.
Insert the drivers and utilities CD into your computer to launch the installation software.
NOTE:
If the CD does not automatically launch, click Start -> Run, and then type D:\setup.exe
(where D is the drive letter of your CD), and then click OK.
4.
Select Personal Installation, and then click Next.
5.
Click Install.
6.
When the Found New Hardware Wizard dialog box appears, follow the on-screen instructions to
install the printer driver on your computer.
7.
When the Completing the Found New Hardware Wizard dialog box appears, click Finish.
8.
Select either Typical Installation or Custom Installation from the installation wizard, and then click
Install. If you select Custom Installation, you can select the specific software you want to install.
9.
Click Finish to exit the wizard when the Congratulations! screen appears. If necessary, click Print Test
Page to print a test page.
®
Windows NT
1.
Connect the printer to your computer with a parallel cable. Then, turn on the printer.
2.
Insert the drivers and utilities CD into your computer.
3.
Select Personal Installation, and then click Next.
4.
On the Add Printer screen, select the port name from the Port Name combo box, and then set the
printer's options under Printer Configuration. Then, click Next.
5.
Select either Typical Installation or Custom Installation from the installation wizard, and then click
6.
4.0
®
Advertisement
Table of Contents
