Table of Contents
Advertisement
e.
f.
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box.
g.
Click the Add button to display Wireless network properties.
h.
Under the Association tab, enter the following information and click OK.
Network name (SSID): dell_device
Network Authentication: Open
Data encryption: Disabled
Ad hoc network: Checked
i.
Click the Move up button to move the newly added SSID to the top of the list.
j.
Click OK to close the Property dialog box.
NOTE:
When your OS is earlier than Windows 2000, create settings according to the manual of the
wireless setting tool provided by your wireless device manufacturer.
For Windows Vista:
a.
Open Control Panel.
b.
Select Network and Internet.
c.
Select Network and Sharing Center.
d.
Select Connect to a network.
e.
Select dell_device from the network items listed in Connect to a network.
f.
Select Connect Anyway in the warning dialog box indicating you are entering an unsecured
area.
g.
Click Close in the dialog box after confirming the connection is a success.
3.
Check the IP, subnet mask and gateway address on your computer.
e.g. IP: 192.168.1.1
Subnet mask: 255.255.0.0
4.
Set the IP address from the printer control panel to be in the same range as that of your computer.
Match the subnet mask and gateway addresses of the printer to your computer settings.
a.
Press Menu button.
b.
Scroll to Admin menu.
c.
d.
- Quick Links:
- Tray Settings
Hide quick links:
Advertisement
Table of Contents
