Dell 3110 Color Laser User Manual page 44

Host Name
Workgroup
Administrator Name
Administrator
Password
Confirm Administrator
Password
Maximum Sessions
Unicode Support On
Off
Auto Master On
Mode
Off
Encrypt On
Password
Off
Job Time-Out
Connection Time-Out
NOTE: The settings in the SMB page will be valid only when the printer is rebooted. Click the Restart
printer to apply new settings button to apply new settings.
NOTE: An optional multi protocol card is required to display the SMB page.
AppleTalk
Purpose:
To configure the detailed settings for AppleTalk.
Values:
Specifies the host name up to 15 alphanumeric characters. The original setting
will remain valid if no input is made.
Specifies the workgroup name up to 15 alphanumeric characters. The original
setting will remain valid if no input is made.
Specifies the administrator name up to 20 alphanumeric characters. The original
setting will remain valid if no input is made. The default name is admin .
Specifies the administrator password up to 14 alphanumeric characters. The
original setting will remain valid if no input is made. The default password is
password .
Allows you to confirm the configured administrator password by re-entering the
same password.
Displays the maximum sessions.
Notifies the host name and workgroup name in Unicode characters.
Does not notify the host name and workgroup name in Unicode characters.
Enable the Auto Master Mode.
Disable the Auto Master Mode.
Encrypts the password.
Does not encrypt the password.
Sets the timeout period from 60 to 3600 seconds.
Sets the connection timeout period from 60 to 3600 seconds.