Dell 3110 Color Laser User Manual page 37

System Printer Name
Settings
Location
Contact Person
Administrator E-
Mail Address
Asset Tag Number
EWS Auto Refresh
Settings
Auto Refresh
Interval
NOTE: The auto refresh feature is effective for the contents of the Top Frame, Printer Status page,
Job List page, and Completed Jobs page.
Port Settings
Purpose:
To specify whether to enable or disable printing ports and management protocol features.
Values:
Ethernet Ethernet
1
* Settings
Current Ethernet Settings
MAC Address
Port LPD
Status
Port9100
Specifies the name of the printer up to 31 alphanumeric characters.
Specifies the location of the printer up to 63 alphanumeric
characters.
Specifies the contact name, number, and other information of the
printer administrator and service center up to 63 alphanumeric
characters.
Specifies the contact address of the printer administrator and
service center up to 63 alphanumeric characters.
Enter the asset tag number for the printer.
On Refreshes the contents of the status display pages automatically.
Off Does not refresh the status display pages automatically.
Sets the time interval for refreshing the contents of the status
display pages automatically from 15 to 600 seconds.
Auto Detects Ethernet transmission rate and the duplex settings
automatically.
10BASE-T Selects 10Base-T Half-Duplex as the default value.
Half-Duplex
10BASE-T Selects 10Base-T Full-Duplex as the default value.
Full-Duplex
100BASE-TX Selects 100Base-T Half-Duplex as the default value.
Half-Duplex
100BASE-TX Selects 100Base-T Full-Duplex as the default value.
Full-Duplex
Displays the current settings of Ethernet.
Displays the printer's MAC address.
Select the check box to enable the LPD.
Select the check box to enable the Port9100.