Dell 3110 Color Laser User Manual page 90

Connectivity Technology Wireless
Compliant Standards
Bandwidth
Data Transfer Rate
Device Type
Security
NOTE: To use the wireless printer adapter, you must install the multi protocol card first. To install the
card, see "Installing the Dell Multi Protocol
1. Make sure that the printer is turned off and unplug all cables including the power cord from the rear of
the printer.
NOTE: Make sure that the multi protocol card is installed.
2. Remove the single thumbscrew from the top of the plate covering the wireless printer adapter socket
and then remove the plate.
3. Insert the wireless printer adapter into the USB socket with the Dell logo of the adapter facing out.
802.11b/802.11g
2.4GHz
11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
11b mode: 11, 5.5, 2, 1 Mbps
Wireless Printer Adapter
64(40-bit key)/128(104-bit key) WEP Encryption/WPA/WPA2
Card".