Table of Contents
Advertisement
Network
Supported operating systems
protocol
IPP
Windows Vista/XP/XP x64/Server 2003/Server
2003 x64/2000/NT 4.0, Mac OS X 10.3.9/10.4.3
SMB
Windows Vista/XP/XP x64/Server 2003/Server
2003 x64/2000/ NT 4.0
IPX/SPX
NetWare3.12/3.2/4.1/4.11/4.2/5/6/6.5*
AppleTalk
Mac OS X 10.2.8/10.3.9/10.4.3
Bonjour
Mac OS X 10.2.8/10.3.9/10.4.3
IPv6
Windows Vista
*Only compatible with Support Pack 1.1 or later.
1.
Make sure that the printer is turned off and unplug all cables including the power cord from the rear of
the printer.
2.
Turn the screw on the control board cover in counterclockwise direction and open the cover.
3.
With the connector of the multi protocol card aligned over the mating connector on the control board,
make connections together by pressing on the back of the MPC card nearest the connecter pins.
Advertisement
Table of Contents
