Dell 3110 Color Laser User Manual page 45

AppleTalk Printer
AppleTalk
Zone
AppleTalk
Type
Delay Start
Time
NOTE: An optional multi protocol card is required to display the AppleTalk page.
E-Mail Alert
Purpose:
To configure detailed settings for E-Mail Alert. This page can also be displayed by clicking E-Mail Alert in the
Left Frame.
Values:
E-Mail Primary SMTP Gateway
Server
Settings
SMTP Port Number
E-Mail Send
Authentication
SMTP Login User
SMTP Login Password
POP3 Server Address
POP3 Port Number
POP User Name
POP User Password
Reply Address
Specifies the printer name in the AppleTalk network up to 32 alphanumeric
characters and symbol sets.
Specifies the AppleTalk zone name up to 32 alphanumeric characters and
symbol sets.
Displays the AppleTalk type.
Specifies the delay start time between 1 and 255 seconds. A zero (0) value
specifies no delay.
Sets the primary SMTP gateway.
Specifies the SMTP port number. This must be 25 or between
5000 and 65535.
Specifies the authentication method for outgoing e-mail.
Specifies the SMTP login user. Up to 63 alphanumeric
characters, periods, hyphens, under bars, and at symbols (@)
can be used. If specifying more than one address, separate
them using commas.
Specifies the SMTP account password up to 31 alphanumeric
characters.
* 1
Specifies the POP3 server address in IP address format of
"aaa.bbb.ccc.ddd" or as a DNS host name up to 63 characters.
* 1
Specifies the POP3 server port number. This must be 110 or
between 5000 and 65535.
* 1
Specifies the POP3 account user name.
Up to 63 alphanumeric characters, periods, hyphens, under
bars, and at symbols (@) can be used. If specifying more than
one address, separate them using commas.
* 1
Specifies the POP3 account password up to 31 alphanumeric
characters.
Designates the reply e-mail address sent with each E-mail Alert.