Dell 3110 Color Laser User Manual page 210

Disk Full
016-980
Job too Large
Press
PDL Request
016-720
Data Violation
Press
Invalid Job
016-799
Data Violation
Press
Ready to Print
193-700
Non-DELL Toner
Installed
Over Heat
042-700
Cooling down
Please Wait...
Ready to Print
142-700
Over Heat
Turned Halfmode
RAM disk memory is full
and cannot continue
processing the current
print job.
Error relating to PDL
emulation problems
occurs.
When the configuration
of the printer on the
printer driver does not
conform to the printer
you are using, this
message appears.
The printer is in the
custom print cartridge
mode.
Since it is abnormally
hot inside the printer,
printing is paused.
Since it is abnormally
hot inside the printer,
the print speed
decreases.
See "Accessing Held Jobs From the Operator
· Press to clear the message, cancel the current
print job, and conduct the next print job, if any.
· Press Cancel to cancel the print job.
· Press Menu to open Stored Print and delete the
current job.
· To avoid this error in the future, do the following:
· Reduce the number of print pages such as
splitting the print data.
· Increase free memory space by deleting
unnecessary data in the RAM disk.
See "Accessing Held Jobs From the Operator
· Press to clear the message, cancel the current
print job, and conduct the next print job, if any.
· Press Cancel to cancel the print job.
· Press Cancel to cancel the print job.
· Press to clear the message, cancel the current
print job, and conduct the next print job, if any.
· Make sure that the printer configuration on the
printer driver conforms to the printer you are using.
Though some of the print cartridges reach the end of
their lives, you can continue printing.
Wait for a while with the printer on until the error
disappears.
Do not start another print job until the warning
disappears.
Panel"
Panel"