Gerber OMEGA CP Reference Manual page 82

68 Chapter 6:
Using Layers
Duplicate Layer command
Creates a copy of the selected layer and inserts it in front of (on top of) the original layer. The
copied layer is named Layer X Copy (followed by a number is there is already a copy of the
layer, i.e. Layer 1 Copy, Layer 1-2 Copy). Objects on the new layer are offset slightly from the
originals for easy identification. The copied layer becomes the active layer.
This copy offset distance is set in the Detail tab of the Tools > Options dialog box using the
Paste/Duplicate Offset Distance control. The default setting is 0.150 inches.
Lock All Layers/Unlock All Layers
Lock All Layers simultaneously locks all layers in the job. Unlock All Layers unlocks all
layers in the job.
Hide All Layers/Show
Hide All Layers simultaneously hides all layers in the job. Hidden layers can still be output.
Show All Layers simultaneously displays all layers and their objects
Expand All Layers/Collapse All Layers
Expand All Layers displays all objects on all layers. Collapse All Layers hides the list of
objects on all layers so that only the layer names display.
Edit All Layers
Edit All Layers is turned on by default. When active, you can select or edit objects on any
layer. When this option is turned off, you can only select or edit objects on the active layer.
You can deactivate/activate this option by clicking the Edit All button at the top of the Layer
Manager. Change the default setting on the Layout tab of the Tools > Options dialog box.
All Layers
.