Gerber OMEGA CP Reference Manual page 501

To create fixed stripes
1 Select two objects or groups.
2 Click Tools > Effects to open the Effects dialog box.
3 Click Stripes to open the Stripes dialog box.
4 Turn on the Fixed check box, and enter the desired Number of Stripes.
5 Choose Horizontal or Vertical in the Type group box.
6 Enter a size value for the stripe in the Stripe text box.
7 Click Continue.
To create two-color horizontal stripes
1 Select two objects or groups.
2 Click Tools > Effects to open the Effects dialog box.
3 Click Stripes to open the Stripes dialog box.
4 Choose Horizontal in the Type group box.
5 Enter values for Stripes and Gaps in the Size group box.
6 Turn on Stripes and Gaps.
7 Click Continue.
Tip: Smart-edit the design by double clicking on it. Change any of the settings then click
Continue to view new results. To remove the Stripes, Smart edit the design and click Stripes
Off.
487