694
Chapter 63:
Printing a Job on a Vinyl Printer
♦ Job Area applies Finishing foil all the way to the boundaries of the job including all
print and cut shapes.
♦ Apply to Clear Fills/Strokes determines if clear fills and strokes are coated with the
chosen finishing foil. When this option is turned off, clear fills and strokes do not have
the finishing foil applied.
Note: Jobs that have clear fills or strokes, which extend beyond the printed area, may have their
print limits recalculated when a finishing foil is applied to the clear fill or stroke. The
application of a finishing foil changes clear fills and strokes to print objects and may cause
previously calculated job boundaries, repeats, or panels to be invalid. GSPPlot displays a
warning message when print limits have to be recalculated.
To apply a finish to a job
1 Click Setup > Print Options to open the Print Options dialog box.
2 Click the Backing/Finish button to open the GerberColor Backing and Finish dialog
box.