Gerber OMEGA CP Reference Manual page 659

Correcting colors for Images
If the job contains a process-color filled image, you can allow the GSPPlot program to choose
the best color correction for the image by turning on the Auto Select check box in the Print
Option dialog box. If you turn this check box off, you choose the color correction in the Color
Correction list box found in the Color Management dialog box in Composer.
Note: If you get unwanted areas of pure white or pure black when printing a process-color
filled image, try adjusting the Black/White Filter settings found in the Color Management
dialog box in Composer, or turn off the filter completely.
To automatically choose color correction
1 Open a job containing a process-color filled image in the GSPPlot program.
2 Click Setup > Print Options to open the Print Options dialog box.
3 Turn on the Auto Select check box.
To manually choose color correction
Turn off the Auto Select check box in the Print Options dialog box. The Color Correction list box
is available for you to make the choice from the list in the box. The list changes based on the
profiles that you have loaded from the OMEGA Profile CD and the device to which you are
printing.
Tip: The GERBER EDGE FX and the EDGE 2 use the same color profiles. When choosing a color
profile for the GERBER EDGE FX, choose a profile for the EDGE 2.
Turn on GA Color Correction to display a list of color profiles that assist in matching colors of a
job created with GRAPHIX ADVANTAGE software or other reasons as explained in the
following guidelines:
Auto Select
GA Color
Correction
645