Gerber OMEGA CP Reference Manual page 778

764 Chapter 72:
Additional ColorID Software Features
4 To add a color to the inventory hold down the Ctrl key and click the color to select it.
5 To delete a color from the inventory hold down the Ctrl key and click a highlighted
color to deselect it.
Note: If you do not hold down the Ctrl key when selecting or deselecting a color, all selections
are erased. If you accidentally do this, immediately click Cancel to close the inventory list, then
reopen the list by clicking on Inventory. All selected colors will still be selected.
Customizing the inventory
Gerber offers an extensive choice of Matching Target Palettes that you can use for matching
colors. Some of these palettes you may use frequently, while others you may never, or seldom
use.
To make choosing the target palette quicker, you can edit the Matching Target Palette inventory
so that only those palettes you routinely use appear in the Matching Target Palette drop-down
list.
To customize the inventory
1 Click Start > Programs > GSP OMEGA > Gerber ColorID to display the Gerber
ColorID dialog box.
2 Click the Settings button to display the Settings dialog box. The right side of the dialog
box lists the Target Palettes that you can add or remove from the Matching Target
Palette drop-down list.