Sizing The Work Surface; Zooming In On The Job; Viewing The Attributes Of A Job - Gerber OMEGA CP Reference Manual

Sizing the work surface

The work surface can be resized for better viewing or to increase your workspace.
To resize the work surface
1 Position the mouse on a corner or side of the work surface so the pointer becomes a
double-sided arrow.
2 Click and drag the work surface to the desired size.
To minimize the work surface
Click the minimize button in the upper right corner of the active window. The job window
becomes a button at the bottom of the screen.
To maximize the work surface
Click the maximize button in the upper right corner of the active window. The job window fills
the screen.

Zooming in on the job

The Zoom commands allow you to control the viewing distance of your job.
To zoom in
1 Click View > Zoom In.
2 Click and drag the Zoom tool around the area of the job to magnify.
To zoom out 1 level
Click View > Zoom Out 1 Level.
To zoom out
Click View > Zoom Out.
Tip: If a magnified job extends beyond the limits of the display, use the scroll bars to change
the viewing area.

Viewing the attributes of a job

Go to the View menu to display the various attributes of your job. For the print and cut
attributes of a job choose Show Print, Show Cut, or Show All in the View menu. Show Print
displays objects that are print-only or print and cut. Show Cut displays objects that are cut-only
or print and cut. Show All displays all objects. The corresponding objects in the job display with
color-coded wire frames.
613