Gerber OMEGA CP Reference Manual page 707

8 Click OK to return to the Print Options dialog box where you can review the print
order of the foils.
9 Click OK to apply the settings to the job and return to GSPPlot.
Applying a finish over the job
You can apply a finishing foil over your job using the GerberColor Backing and Finish dialog
box. If you are working with layers, finish settings apply to the entire job. Two finishing foils
are available for application over the job.
♦ Abrasion Guard™ is a special foil that applies a coating to protect the job from
scratches.
♦ Matte Clear foil coats the job to reduce gloss and also protects against scratches.
There are several choices on how the finishing foil is applied.
♦ Print Shapes applies the finishing foil to individual shapes in the job. In the job below,
which includes print and cut-only objects, Print Shape applies finishing foil on top of
the printed oval.
♦ Print Area applies finishing foil to the area within a bounding box that surrounds all
print shapes. Cut vinyl shapes are not included. In the example, the square represents
the bounding box of the print shapes and defines the Print Area. Included are print
and cut-only objects, Print Area extends beyond the printed shapes and yields
undesirable results.
693