Gerber OMEGA CP Reference Manual page 51

♦ Cut Print Colors causes all objects to be drawn with a solid line using the Cut Only,
Print Only, and Cut Print colors. The default colors can be set on the Tools > Options >
General tab.
♦ Vinyl Colors causes the objects to be drawn with a solid line using their assigned
vinyl colors. If the currently assigned background color is the same as an object's vinyl
color then that object will not be visible in Vinyl Colors mode.
♦ Fill Colors causes the objects to be drawn as wireframes in their assigned fill colors.
Gradient fills are drawn using a dotted line. If an object has a process color gradient
fill the first color of the fill is the wireframe color. If an object has a spot gradient fill
the wireframe color is the highest percentage tint. Clear fills (or no fills) are drawn
using a dashed line in the vinyl color. If the currently assigned background color is the
same as an object's filled color then that object will not be visible in Fill Colors mode.
Image Placeholders are drawn differently depending on their color. Process color image place
holders use a dotted black line; spot image place holders use a solid color line in the assigned
spot color.
Small Text is drawn solid in the color that reflects the fill. Gradient fills are drawn as a cross
hatch pattern and clear fills (or no fills) are drawn using diagonal lines.
Tip: There are two Wireframe Modes for Single Color or Cut Print Colors: Finish and Redraw.
See the topic, "View tab" for detailed information on these modes and how to set the default.
Viewing or printing the Wireframe Legend
The rules of wireframe drawing are complex. Click View > Wireframe Legend to access a
chart of the current wireframe settings. Once the Wireframe Legend is open you may print it
on a paper printer using the Print button.
37