Selecting, Reverse Selecting, And Deselecting Text - Gerber OMEGA CP Reference Manual

470 Chapter 43:
Fitting Text to Path
Note: You cannot open the Fit Text to Path dialog box until both a path and text are created
and selected.
Making Fit Text to Path easier to use
There are three buttons in the Fit Text to Path dialog box that make working in this option
easier to use: Show Tool Tips, Undo Last Change, and Redo Last Change.
Show Tool Tips in the dialog box toolbar displays the name of the tool when putting the
cursor on a tool button.
Undo Last Change reverses any changes you made in the dialog box. You can undo the
last 100 changes in the order they were made.
Redo Last Undo restores changes reversed by Undo Last Change. You can restore the
last 100 undos in the order they were changed.

Selecting, reverse selecting, and deselecting text

There are three tools available for selecting text characters. You do not select an individual
character by clicking it.
To select, reverse select, and deselect text
1 Click the Select tool, then click and drag a box around the items to be selected. The
selected items will turn red.
2 Click the Reverse Select tool, the selected text is deselected and unselected text is
selected.
3 Click the Deselect tool to cancel any text that is selected.