Gerber OMEGA CP Reference Manual page 639

9 Turn off Display Error Messages. If an error occurs in one of the files, batch processing
will continue if possible. If processing cannot continue, the file name remains in the
Files to Process list.
10 Turn on Replace Existing Files to overwrite any existing SPL files and continue batch
processing.
11 Turn off Keep Image Separations. Image Separations are IMO files. IMO files are not
needed for SPL files that contain the necessary rendering information.
12 Turn off Beep When Finished since the system is unattended.
13 Click Start.
To Batch Save Spool Files when the system is attended
1 Click File > Open to open an existing file.
2 Click File > Save Parameters to create a PRM file.
3 Repeat this process for each PLT file in your batch.
4 Click File > Batch Save Spool Files to open the Open dialog box.
5 Choose the folder from Look in.
6 Choose the files to batch process from the list using the Shift or Ctrl keys and the
mouse.
7 Click Open to open the Batch Spool Save dialog box.
625