Gerber OMEGA CP Reference Manual page 65

Text tab
The Text tab of the Options dialog box contains settings for Fonts and Layout for text. Click
Apply to confirm the settings. Click OK to return to Gerber factory defaults.
Font group box
Default Font for Enter/Edit Text Box
Choose a default font to use in the Enter/Edit Text Box from the drop down list. Also enter a
default height and slant.
Show Most Recently Used Fonts
Turn on Show Most Recently Used Fonts to show the last chosen fonts at the top of the
Selection Font combo box in TOWS. Turn off this option if you do not wish to show the fonts
at the top of the list. See the topic: Choosing a font in TOWS for details.
Show Font not in Font List Warning
Turn on Show Font not in Font List Warning to display a warning if the active font in TOWS
is no longer available because of the current font filter settings. See the topic: Limiting and
displaying available font choices in TOWS for details.
Layout
Choose the layout defaults for justification of text as you enter it. See the topic: Entering and
justifying text in lines or columns for details.
♦ Justification – Choose Center, Left, or Right for layout when entering text.
♦ Horizontal – Choose Left to Right or Right to Left for layout when entering text.
♦ Vertical – Choose Top to Bottom or Bottom to Top for layout when entering text.
Line Rotation
Enter a default angle of rotation to apply to text as it is entered. The angle must be between -
80 and 180 degrees.
51