Zooming In Or Out On The Design - Gerber OMEGA CP Reference Manual

38 Chapter 5:
Setting Up Composer's Work Surface

Zooming in or out on the design

Composer provides several ways of zooming in or out on objects. Click one of the Zoom tools
or click View > Zoom > Zoom tool to activate the tool.
Zoom In magnifies the area where you click one level, or the area that you surround
with a rubber band box.
Zoom In One Level automatically magnifies the view one level without clicking the
work surface.
Zoom Out/Select Center reduces the magnification of the job one level centered at the
point that you click on the work surface.
Zoom Out One Level automatically reduces the magnification one level without
clicking the work surface.
Zoom to Selected magnifies the currently selected object so that it fills the work
surface.
Zoom to All resizes the design so that it is in the center of the work surface with a
small border around it. Pressing the Space Bar will also Zoom to All.
Adjusting the level of zoom magnification
In the Options dialog box, you can set your zoom tools to adjust the level of magnification
when zooming. The amount of magnification can be adjusted between 0 (widest zoom) and
20 (tightest zoom). The default level of magnification is 8.
To adjust the level of zoom magnification
1 Click Tools > Options > View Tab.
2 In the Working Area group box use the slider to adjust the Zoom Wider or Tighter.
Alternately, enter a number between 0 and 20, (0 being the widest and 20 being the
tightest).
3 Click OK to return to the Composer work space.