Gerber OMEGA CP Reference Manual page 688

674 Chapter 61:
Choosing the Plotter or Printer
3 Click Settings to open the Plotter Settings dialog box.
4 Click the slider bar under Speed and drag it to adjust the plotter speed.
5 Click Advanced to also view the speed as inches per second.
6 Click OK.
Setting plotter acceleration
The Acceleration setting controls how quickly the plotter reaches its speed setting. A high
acceleration setting causes the material and plotter tool to move with quick sudden motions.
Choose high acceleration if you want to cut your job quickly. A low acceleration setting causes
the material and plotter tool to move with smooth, even motions.
To adjust the Acceleration setting, drag the slider bar up to increase plotter acceleration and
down to decrease plotter acceleration. Acceleration is represented as a percentage displayed
below the slider bar. The maximum acceleration setting for the plotter is 100%. If you're looking
for more advanced communication abilities, click the Advanced button to view acceleration in
terms of gravity, in increments of 0.5G. (If the plotter has limited communication abilities,
Advanced will not be available.)
To change the acceleration setting of a plotter
1 Click Setup > Device Select to open the Plotter/Printer Select dialog box.