Gerber OMEGA CP Reference Manual page 628

614 Chapter 54:
Setting Up the GSPPlot Window
Job attributes are color-coded for easy identification:
♦ Print-only objects are outlined in red.
♦ Cut-only objects are outlined in black.
♦ Cut and print objects are outlined in green.
♦ Clipping path objects are outlined in grey.
♦ Overlap objects are outlined in purple.
♦ Overprint objects are outlined in blue.
♦ Weed borders are shown in blue.
Tip: Choosing Preview displays the objects with the fills assigned in Composer. When working
with a vinyl-only job, choose Vinyl only, in conjunction with Preview, to accurately display layered
text and shapes.
To view print-only, or print and cut objects
Click View > Show Print.
To view cut-only, or print and cut objects
Click View > Show Cut.
To view all objects
Click View > Show All.
Viewing Clipping Paths
When viewing Clipping Paths in GSPPlot the wireframe mode shows the clipping path
container in grey and the object being clipped along with the bounding box of the final clipped
path. Preview mode displays only the results of the Clipping Path command inside the
bounding box.
Foil and vinyl usage is determined by the clipped path and does not include the area outside
the bounding box.