Gerber OMEGA CP Reference Manual page 656

642 Chapter 58:
Advanced Setup Options
Substituting an alternate vinyl family or foil color
GSPPlot automatically sends the optimal print information to the printer based on the foil and
vinyl family that has been chosen in Composer. Therefore, the foil and vinyl family chosen in
Composer (and thus displayed in the Print Options dialog box) should match the materials
used in the printer. If you load a different vinyl in the printer, specify the new vinyl family or
foil color by choosing Substitute in the Print Options dialog box.
Tips: Right-click either the Vinyl Color or the Foil Color for a shortcut to perform a substitution
or to turn off the substitution.
In the drop down menu you also have the ability to choose Double Print. Double-printing each
foil on the EDGE, EDGE 2, EDGE FX, or GERBER MAXX 2 may enhance the appearance of
backlit graphics. The printer prints each foil twice before prompting or changing to the next foil.
To change the vinyl family
1 Click Setup > Print Options to open the Print Options dialog box.
2 Click Substitute to open the Substitute message box.
3 Click Vinyl to display the Substitute Vinyl Family dialog box.
4 Choose a new vinyl family from the Vinyl Family list.
5 Click OK. The Print Options dialog box displays the new vinyl.
To change a foil color
1 Click Setup > Print Options.
2 Click Substitute to open the Substitute message box.
3 Click Foil to display the Substitute Foil dialog box.