Gerber OMEGA CP Reference Manual page 219

3 Choose Radial or Linear in the Fill Type group box.
4 Choose Spot in the Color Type group box.
5 Enter a Position value or double-click the right or left box of the position slider. A
black arrow appears on the position slider.
6 Choose a spot color from the scrolling palette.
7 Enter a Tint percentage from 0 to 100%.
8 Enter a Position value or drag the black arrow to locate the color within the gradient
fill.
9 Double-click the right or left box of the position slider to display another black arrow.
10 Repeat steps 5 through 7 to add new spot colors to the fill.
11 To edit a color within the fill, select the color position arrow (it will turn black) and
change the location, color or tint.
12 If using Linear Fill, enter the angle in the Linear Angle group box. If using Radial Fill,
enter the X and Y% offsets in the Radial Center Offset group box. For either fill, click
inside the sample fill box and visually adjust the position of the fill. The sample fill box
displays a preview of the fill.
13 Click OK to return to the Composer work surface.
Tip: To remove a color, double-click that color arrow in the position slider or drag the arrow off
the end of the slider.
205