Gerber OMEGA CP Reference Manual page 207

3 Choose the vinyl color to use for printing from the Vinyl Color palette.
4 Click OK.
Tip: To create special effects, you may want to choose a colored vinyl instead of printing with
white vinyl.
Choosing the foil color
Use the Foil Color palette to choose a color sample that appears to be the closest match to one of
the colors displayed in the top row of the Reference Color palette.
If you are uncertain about the color match, choose several foil colors. The system only assigns
fills from those foil colors that best match the original color; therefore, some of the foil colors
you chose, may not be used in the job.
When posterizing, the system calculates the tint percentage of a color (0 to 100) that best
matches the reference colors and the color you selected appears outlined.
To choose the foil color
1 From the Posterize Selected Shapes dialog box, click a color sample from the Foil Color
palette that appears to be the closest match to one of the colors displayed in the top
row of the Reference Color palette. The system calculates the tint percentage (from 0 to
100) and the foil color sample you selected is now outlined.
2 If you want the system to use the selected color at 100 percent, double-click the
selection. A diagonal line bisects the color sample indicating that the system will use
the selected color at 100 percent tint.
3 If you want to deselect your color choice, click the selection a third time.
193