Color Management And Scanning - Gerber OMEGA CP Reference Manual

386 Chapter 35:
Scanning Artwork
♦
The Vantage Scan II program in the GSP OMEGA program group allows single or
multiple black and white image files to be vectorized into PLT files outside of
Composer.
♦
Composer Tools > Generate Decal Cut: Generate Decal Cut creates a cutline around
the footprint or extremities of image files or vector files on the Composer work surface.
The source artwork can be a monochrome or color image, or vector shapes. This makes
it easy to generate a cut line for jobs that will be printed then cut on a vinyl cutter.

Color Management and scanning

One of the biggest problems of digital printing is color consistency from the original artwork to
the scanner to other programs to the monitor and to the final output device. GERBER OMEGA
includes a Color Management system that helps make color more consistent through the
production process.
To use the OMEGA Color Management system
1 Install the MonacoEZcolor software included with your OMEGA package
2 Use the MonacoEZcolor software to profile you scanner and paper printer
3 Assign the scanner profile to scanned images as the Source profile as they are
imported into Composer
4 Use the MonacoEZcolor software and a monitor calibration device to profile you
monitor
5 Use the monitor profile you created in the OMEGA Color Management dialog box.
6 Be sure to use the output profile in Composer and GSPPlot that closely matches how
you intend to output the final image file. For Gerber printers, the profiles are provided
by GSP in OMEGA software. You do not have to make these profiles.
To design, import, and output images
1 Learn the basics of the Color Management system of the other programs.
2 Be aware of the color model you use to save your images (RGB or CMYK).
3 Be aware of any profiles assigned to files that are saved from other programs.
4 Assign those profiles as the Source Profile when those images are imported into
Composer.
5 Be sure to use the output profile in Composer and GSPPlot that closely matches how
you intend to output the final image file including printer, material, foils, and
halftones.
Tip: Once the image or raster file is in Composer, you can perform basic editing functions using
Composer tools or you can edit the file in a third-party image editing program. For more
information see "Editing images."