Automatically Convert Process Fills To Spot Fills - Gerber OMEGA CP Reference Manual

212 Chapter 17:
Filling Objects with Color for Printing
2 Click Setup > Print Options to open the Print Options dialog box.
3 Turn on Print As Process. The spot colors are automatically converted into process
colors.
4 If you are converting a job that has cut lines you can preserve the cut attributes by
turning on the Keep Cuts checkbox.
5 Choose a Process Foil Set from the drop down menu.
6 Click OK to return to QuickPlot where you can output the job.

Automatically convert Process fills to Spot fills

Use the Assign Colors dialog box to easily convert Process color fills to Gerber Spot color fills.
The fills are mapped to the best-matched Spot color and a Tint percentage is applied. This
technique works for both single color and gradient fills.
To convert Process color fills to Spot color fills using Assign Colors dialog box
1 Select a Process color object.
2 Click the Fill tool to open the Assign Colors dialog box.
3 Turn off Changes only.
4 Turn on Spot in Color Type.
5 Click OK to return to Composer.