Gerber OMEGA CP Reference Manual page 107

To view and/or print font titles and file names
1 Right-click the GSPTray icon to open the Gerber Tray menu.
2 Click Gerber Installed Fonts to open the Fonts Selected for Printing dialog box.
3 If you wish to print the titles and file names of all the available fonts, click Select All.
To print the title and file name of only certain fonts, highlight the fonts.
4 Click Print List (names only).
Tip: If you are planning on printing more than one font, you can click Save Selected after the
selection. You can then recall your previous selection of fonts using the Restore Selection
option.
To print font characters
1 Right-click the GSPTray icon to open the Gerber Tray menu.
2 Click Gerber Installed Fonts to open the Fonts Selected for Printing dialog box.
3 Highlight the names of the fonts you want to print.
4 In the Text Height boxes, enter a size and mode of measurement for the fonts.
5 Turn on either wireframe or filled to print the fonts as either wireframe or prefilled.
6 Turn on One Font Per page to print only one font per page.
7 If you want a left margin that allows for hole punches, enter the amount by inches in
the Left Margin in (inches) text box.
8 Click OK. The highlighted fonts print as the alphabet in upper and lowercase. The
Font title, File name, and text are shown at the top of the page.
Choosing the size
Once you have chosen your font you can then choose the character size.
To size characters in TOWS
1 In the TOWS toolbar, highlight the size box.
2 Type new height.
To size characters in the Enter/Edit Text dialog box
1 In the Enter/Edit Text dialog box, click F2 Height.
2 Enter height.
To size characters in Small Text
1 In the Enter/Edit Small Text dialog box, click Font Select to open the Font dialog box.
2 Choose the size.
93