Installing The Harness Connectors - Brother LX-300 Service Manual

4.16.3 Installing the Harness Connectors

1. Attach the harness connectors (except the power harness assy) to the Main PCB
according to the color sequence shown in the diagram.
2. Connect the harnesses along the paths shown in the diagram.
3. Tape harnesses *1, *3, and *4 to the right face of Bottom cover B.
Pass the *5 Black (4P) cable through the three harness retainers.
4. Install the F cable as shown in the diagram below.
Harness
retainers
White (2P)
Black (2P)
*1 Orange (2P)
*3 Blue (2P)
White (4P)
Red (2P)
*2 Red (5P)
F cable
*5 Black (4P)
FPC holder A
Fig. 4.16-5 Installing the Harness Connectors
4-31
(6P)
Yellow (2P)
*4 Yellow, blue, white, red, gray (5P)
Black (6P)
Installation of the *2 harness.
Tape
Pass the F cable loosely
round the tips of the lugs on
the Cassette holder.
F cable
Cassette holder lug
CL2000011
Installation of the
*1, *3, *4 harnesses.
Insert the core with
the harness wound on
it to the rib in the
cover.