Removing The Push Switch Assy - Brother LX-300 Service Manual

3.3.11 Removing the Push Switch Assy

1. Remove the two Push switch screws. Remove the Push SW assy 1 (white) and
Push SW assy 2 (red).
∗
Before removing the Push SW assy 1 and 2, turn the Dial switch such that it
does not touch the push switches (mid-point between Push SW assy 1 and
Push SW assy 2).
∗
Take care not to apply force to the connectors between the Push switch and
harness.
Push switch screws
Fig. 3.3-17 Removing the Push Switches
Push switch assy 1 and 2
3-11