Brother LX-300 Service Manual page 72

5. Install the T-lever B, T-cam roller, and T-cam spring onto T-lever A.
Fig. 4.7-5
6. Insert the T-lever shaft into the shaft holes in the Main chassis R and T-lever A/B.
Push in the T-lever shaft until the groove in the shaft engages with the hook on the
T-cutter assy.
Fig. 4.7-6
T-lever A
Installing the Right Side of the Chassis 3
T-lever B
T-cutter assy
T-lever shaft
Installing the Right Side of the Chassis 4
4-12
T-cam spring
T-cam roller
T-lever B
T-lever A
Groove