Installing The Cover Switch; Installing The - Brother LX-300 Service Manual

4.17.3 Installing the Cover Switch

1. Align the Cover SW assy with the boss hole on the inside surface at the right of the
Body cover and attach it with the Cover switch screw.
2. Install the harnesses for the Dial SW assy and Cover SW assy inside the right of the
Body cover and fasten them with the hooks (Part A).
4.17.4 Installing the Back Cover
1. Install the Back cover by flexing the cover and inserting the shafts into the shaft
recesses in the Body cover.
2. Install the Back cover spring.
Cover switch assy
Body cover
Fig. 4.17-6
Body cover
Fig. 4.17-7
Section A
Installing the Cover Switch
Back cover
Installing the Back Cover
4-35
Cover switch screw
Dial switch holder assy
Back cover spring