2.1.3
Cutter Mechanism (Border Mode)
The cutter mechanism cuts the laminated document to the size of the document plus an
added border. Both edges of the films are cut to suit the width of the document and the
leading edge and trailing edge are cut according to the document length.
S
Y-Cutter Vertical Drive Operation
The SG motor drive rotates the Control cam gear to its prescribed position. This
rotation is transmitted via the YC lift arm and YC lift shaft to rotate the Y-diversion
lever and set the Y cutter to the cutting position.
Y-diversion lever
Y-cutter blade
YC lift shaft
YC lift arm
Fig. 2.1-5
Y-Cutter Vertical Drive Operation
2-5
Control cam gear
SG motor