Brother LX-300 Service Manual page 144

[4] Hold the yellow plastic holders of the new film, align the arrow marks and L/R marks
of the Cartridge bottom cover and the plastic holders, and insert the film into the
cartridge as shown in the diagram. It is not possible to insert the film in the wrong
direction.
[5] Detach the plastic holders in the direction of the arrow.
[6] Close the cartridge cover, ensuring that the edge of the sheet protrudes from the
cartridge film outlet.
Fig. 6.2-10 Replacing the Sheet 4
Fig. 6.2-11 Replacing the Sheet 5
Fig. 6.2-12 Replacing the Sheet 6
6-16