Removing The Yc Lift Shaft And Lf Change Shaft - Brother LX-300 Service Manual

6. Remove the Control cam gear and Double gear S.
Double gear S
Control cam gear
Fig. 3.12-3 Removing the Right Side of the Chassis 2
7. Remove the screws, then remove the Chassis R support. (See Fig. 3.12-1.)

3.12.2 Removing the YC Lift Shaft and LF Change Shaft

1. Remove the Paper eject roller springs.
2. Remove the Y extension spring.
3. Remove the Retaining ring for the YC lift shaft at the left side of the Main chassis.
Retaining ring
Paper eject roller springs
Y extension springs
Fig. 3.12-4 Removing the YC Lift Shaft and LF Change Shaft 1
3-28