Y-Sensor Rail Unit; Removing The Y-Sensor Rail Unit - Brother LX-300 Service Manual

3.8 Y-sensor Rail Unit

3.8.1

Removing the Y-sensor Rail Unit

1. Remove the F cable from the Cassette holder.
2. Remove the two Y-sensor rail screws.
3. Disengage the tip of the Actuator top from the film hole, then remove the Y-sensor
rail unit in the direction of the arrow.
Y-sensor rail screw
Film
The tip of the
Actuator top
Fig. 3.8-1 Removing the Y-sensor Rail Unit
F cable
Y-sensor rail unit
3-21
Cassette holder