3. Remove the Bearing and Sub-bearing and remove the Actuator top from the Paper
feed roller assy.
3.11 Left Side of the Main Chassis
3.11.1 Removing the LF Motor
1. Remove the three LF motor holder screws, then remove the LF motor holder assy
and the three Spacers.
2. Remove the two LF motor screws from the LF motor holder assy, then remove the
LF motor.
Actuator top
Fig. 3.10-3
Removing the Actuator Top
LF motor screw
LF motor
Fig. 3.11-1
Removing the LF Motor
Sub bearing
LF motor holder screw
3-25
Bearing
Spacer