3.3.10 Removing the Dial Switch Holder Assy B
1. Remove the eight Dial holder screws. Remove the Dial switch holder assy B.
2. Disconnect the Push SW assy 1 (white) and Push SW assy 2 (red) connectors from
the SW PCB.
∗
Take care not to apply force to the connectors between switch and harness in
Push switch assy 1 and 2.
Push switch assy 1 and 2
Fig. 3.3-16
Removing the Dial Switch Holder Assy
3-10
Dial holder screws
Dial switch holder assy
Dial holder screws