Removing The Cassette Holder; Removing The Enc Sensor Pcb - Brother LX-300 Service Manual

3.17.2 Removing the Cassette Holder

1. Push in the three hooks on the front face that fix the Cassette holder.
2. Pull out the Cassette holder in the direction of the arrow.

3.17.3 Removing the ENC Sensor PCB

Remove the ENC sensor PCB screw, then remove the ENC sensor assy.
Hooks
Fig. 3.17-2 Removing the Cassette Holder
Fig. 3.17-3 Removing the ENC Sensor PCB
3-34
ENC sensor assy
ENC sensor PCB screw