Removing The Cover Switch - Brother LX-300 Service Manual

2. Flex the center of the Back cover toward you to release the shafts from the shaft
recesses in the Body cover. Remove the Back cover.
During this operation, take care not to deform the film attached to the Back Cover.
3.3.9

Removing the Cover Switch

1. Remove the cover switch screw. Remove the cover switch assy.
Back cover
Fig. 3.3-14 Removing the Back Cover 2
Fig. 3.3-15 Removing the Cover Switch Assy
Film
Cover switch assy
3-9
Shafts
Body cover
Cover switch screw