Driving Roller; Installing The Driving Roller - Brother LX-300 Service Manual

4.4 Driving Roller

4.4.1

Installing the Driving Roller

1. Attach the Retaining ring to the right end of the Driving roller assy (with the shorter
metal part).
2. Insert the Bearings L/R into the Driving roller. Mount it sequentially into Main
chassis L and Main chassis R.
3. After installing Bearings L/R into the Main chassis L/R, attach the Retaining ring to
the left end of the Driving roller assy.
4. Install the Roller gear CD.
Retaining ring
Bearing L
Fig. 4.4-1 Installing the Driving Roller
4-6
Driving roller assy
Retaining ring
Bearing R
Roller gear CD