Installing The Right Side Of The Chassis - Brother LX-300 Service Manual

4.7.2

Installing the Right Side of the Chassis

1. Install the Double gear S.
2. Position the YC lift shaft as shown in the diagram.
3. Install the Control cam gear with the triangular mark on the Control cam gear
aligned with the triangular hole in the Chassis.
∗
Ensure that the boss at the right end of the LF change shaft and YC lift arm is
inserted correctly into the grooves in the Control cam gear. The bosses are
correctly inserted if the Control cam gear rotates smoothly when the Y-diversion
lever is pressed.
4. Install the T-lever A to the Main chassis R.
Main chassis R
T-cutter assy
Boss
YC lift arm
Control cam gear
The triangular mark on the Control cam gear
Fig. 4.7-3 Installing the Right Side of the Chassis 1
Fig. 4.7-4 Installing the Right Side of the Chassis 2
4-11
Boss
LF change shaft
Double gear S
Triangular hole in the Chassis
T-lever A