Installing The Dial Switch Holder Assy - Brother LX-300 Service Manual

4.17.2 Installing the Dial Switch Holder Assy

1. Connect the Push SW assy 1 and Push SW assy 2 harness connectors to the SW
PCB.
Push SW assy 2
Harness connector (red)
Dial Switch holder
2. Turn over the Body cover and attach the Start key, Stop key, Two-connection switch,
Continuous key, and Extra border key.
Check that the LED lenses are correctly aligned with the front of the cover.
LED lenses
Switch PCB
Push SW assy 1
Harness connector (white)
Fig. 4.17-2 Installing the Dial Switch Holder Assy 1
Extra border key
Two-connection switch
Fig. 4.17-3 Installing the Dial Switch Holder Assy 2
Push SW assy 1 (white)
LED lens
Stop key
Continuous key
4-33
Push SW assy 2 (red)
Start key