4.11 Y-sensor Rail Unit
4.11.1 Assembling the Y-sensor Rail Unit (Attaching Y-sensor PCB Assy)
1. Bend the sensor flat cable to the dimensions shown in the diagram below.
2. Attach the FPC holders A to the flat cable.
3. Locate the sensor flat cable inside the Y-sensor rail unit.
Fig. 4.11-1
Bending the Sensor Flat Cable to the Dimensions
FPC holder A
Fig. 4.11-2
FPC holder A
Approx.
170 mm
Sensor Flat Cable Location
4-20
Approx. 350mm
Approx.
25 mm