AT&T Merlin II System Administrator Manual page 67
Voice messaging system for merlin ii communications system release 3
Hide thumbs
Also See for Merlin II:
- Installation and maintenance manual (404 pages) ,
- System manual (245 pages) ,
- User manual (29 pages)
Table of Contents
Advertisement
CHANGING THE
SELECTOR CODE
5-8 Changing Automated Attendant Submenu
9
Enter the announcement number (01 through 99)
followed by [
"Record at the tone."
If the announcement already exists, you'll be asked to press
you want to modify it.
10
Record the announcement.
[
] after recording the announcement.
11
1
Choose an option or go to step 13:
12
[
] [
] to rerecord the announcement.
>
2
1
[
] [
] to rewind and play back the
>
2
3
announcement.
[
] [
] to delete the announcement.
>
*
D
[
] [
] to approve the announcement.
13
*
#
To change the Selector Code in a submenu to transfer to
an existing announcement, follow the procedure below.
Be sure to update the submenu on Planning
NOTE:
Form G: Automated Attendant Submenus.
[
] [
] to change the submenu Selector Code.
1
*
#
The Automated Attendant Administration Menu plays.
2
[
] to modify a submenu.
6
The Menu Definition Options play.
3
Choose the appropriate option:
[
] to create a submenu.
>
4
[
] to change an existing submenu.
>
6
4
Enter the submenu number followed by [
5
Enter a Selector Code ( [
transfer calls to the announcement.
If the Selector Code is already assigned, you'll be asked to
[
]
9
press
if you are modifying it.
].
#
] through [
1
[
]
9
if
].
#
] ) that will
9
Advertisement
Table of Contents
