Sewing Preparation
2.8 Presser Foot
Adjusting the Presser Foot Position via the Knee Lifter of the Free Hand System
> Adjust the sitting height so that the knee lifter can be operated with the knee.
> Push the knee lifter with the knee to the right to raise the presser foot.
– Simultaneously the feed dog is lowered and the thread tension is released.
> Release the knee lifter slowly to lower the presser foot.
Adjusting the Presser Foot Position via the Button «Presser Foot Up/Down»
> To raise the presser foot, push the button «Presser Foot Up/Down».
> To lower the presser foot, push the button «Presser Foot Up/Down» again.
Changing the presser foot
> Raise the needle.
> Raise the presser foot.
> Switch off the machine.
> Push the clamping lever up.
> Remove the presser foot.
> Guide the new presser foot upwards over the cone.
> Press the clamping lever down.
Selecting the presser foot in the user interface
After changing the presser foot, a check can be performed to determine whether it is suitable for the
selected stitch pattern. Additionally, alternative presser feet are displayed, which are available for the selected
stitch pattern.
> Switch the machine on.
> Select the stitch pattern.
> Tap «Presser Foot Indicator/Presser Foot Selection».
37