RS125
5.5.2.
FITTING THE SHOCK ABSORBER
•
Insert the shock absorber from the bottom up.
•
Insert the upper shock absorber screw with its washer
from the left side.
•
Tighten the nut (1) on the opposite side.
•
Fit the connecting rods to the shock absorber.
•
Insert the lower shock absorber screw from the right
side.
•
Tighten the nut (2) on the opposite side.
•
Fit the double connecting rod into its seat in the frame.
•
Insert the screw retaining the connecting rods to the
frame with its washer from the left side.
•
Tighten the nut (3) on the opposite side.
•
Remove the support between swinging arm and seat
frame.
CHASSIS
5 - 37